Support PA 1100 E – Integrated Amplifier with DAC

Support

Catalogue

Catalogue E-Series
Info sheet

User manual

User Manual

Operation with a computer / Firmware

Driver for Windows
Installation Manual

Specifications

Specifications power-amplifier

Nominal output per channel 4 Ohms / 8 Ohms
2 x 250 Watts / 2 x 140 Watts
Peak output per channel 4 Ohm / 8 Ohm
2 x 400 Watts / 2 x 220 Watts
Frequency response -3dB
1 Hz - 60 kHz
Total harmonic distortion / Intermodulation
< 0,004 % / < 0,004 %

Pre amplifier (PRE, REC)

Frequency response
1 Hz - 300 kHz
Total harmonic distortion
0,0025 %
Signal / noise ratio
108 dBA
Channel separation
> 82 dB
Inputs 5 x RCA
250 mVeff ... 3 Veff / 20 kOhms
Inputs 1 x balanced (XLR)
500 mVeff ... 6 Veff / 5 kOhms
Outputs 2 x RCA
PRE OUT, REC OUT 2,5 Veff / 50 Ohms;
Headphones 6,3 mm plug > 32 Ohms

Digital section (DAC, Inputs)

D/A converter
PCM: 32-bit Sigma Delta, 384 kSps
DSD: up to DSD 256 (11,2 MHz)
switchable oversampling algorithems: Standard-FIR and T+A Bezier

Digital inputs

2 x SP/DIF coax.
PCM 32 ... 192 kSps
2 x TOSLINK opt.
PCM 32 ... 192 kSps
1 x USB-B
PCM 32 ... 384 kSps. DSD 64 ... DSD 256 (MAC-OS up to DSD 128)
2 x HDMI,
1 x HDMI (ARC)
(optional accessories)
Stereo: PCM 32 ... 384 kSps, DSD 64
Stereo: PCM 32 ... 192 kSps
Bluetooth
APT-X, MP3, AAC, SBC. AVRCP.

Mains / Accessories / Dimensions

Optional accessories
plug-in phono module MM, 1 - 5 mV, 16 capacitance values
plug-in phono module MC, 60 - 1000 µV, 16 impedance values
plug-in HDMI Modul
Remote control
FM 11 with E 2000
Mains
220-240 V or 110-120 V, 50-60 Hz, 600 W
Standby
< 0,5 Watts
Dimensions (H x W x D)
11,5 x 44 x 38 in cm
Weight
14 kg
Finishes
Silver case + black side panels
Silver case + silver side panels
Black case + black side panels
Technical modifications reserved