Support PA 2500 R – Integrated Amplifier

Support

Catalogue

Catalogue R-Series

User manual

User manual PA 2500 R
User manual phone amplifier

Specifications

Pre-amplifier stage

Frequency response + 0 / − 3 dB
0,5 Hz – 300 kHz
Signal / noise ratio, unweighted / A-weighted
105 / 109 dB
Total harmonic distortion/Intermodulation
< 0,001 % / < 0,001 %
Channel separation
> 90 dB
Loudness
Switchable, variable to suit loudspeaker efficiency
Tone controls
Bass
Treble
Switchable, channel-separate
−6 … +8 dB
−6 … +8 dB
Nominal input sensitivity
High level (RCA)
4 × 250 mV … 4 Veff/20 kOhms
Balanced (XLR)
3 × 500 mV … 8 Veff/5 kOhms
Phono-MM (optional*)
*Phono module replaces one high-level input
1 – 5 mV,
16 Capacitances
Phono-MC (optional*)
*Phono module replaces one high-level input
60 – 1000 µV,
16 Impedances

Outputs

Headphone
50 Ohms
PRE out RCA
Nom 1 Veff, Max 9,5 Veff, 75 Ohms
PRE out XLR
Nom 1,45 Veff, Max 19,6 Veff, 75 Ohms

Output stage

Nominal output per channel
into 8 Ohms 140 Watts
into 4 Ohms 280 Watts
into 2 Ohms 560 Watts
Frequency response + 0/– 3 dB
1 Hz – 150 kHz
Slew rate
60 V/µs
Damping factor
> 65
Total harmonic distortion
< 0,02 %
Reservoir capacity
120000 µF

Mains / Accessories / Dimensions

Control interface
R2-Link
Remote control
FM 2000
Mains connection
100 – 120 V or 200 – 240 V, 50 – 60 Hz
Max. 2000 Watt
Standby
< 0,5 W
Additional features
Trigger input +5V … 20V via adapter plug for remote power-on
Input 3 (symmetrical) or 5 (asymmetrical) can be configured as Surround Pass Through
Dimensions (H x W x D)
16,5 × 46 × 40,5 cm
Weight
14,5 kg
Finishes
Silver anodised aluminium (43), black anodised aluminium (42), brushed
Technical modifications reserved